-96 K11LT gabel feder inbau lange.

Hi Sven,

with the BMW OEM spring, there is a sleeve above the spring, part 1 in this drawing:

[Blockierte Grafik: http://www.realoem.com/bmw/diagrams/m/u/8.png] 
You leave that away with the Wilbers spring. Then it's no problem, to assemble the stanchion without an spring compressor. The Wilbers spring is designed, to run without this sleeve.

Here the whole picture:
http://www.realoem.com/bmw/showparts.do?model=0522&mospid=51712&btnr=31_0334&hg=31&fg=42&lang=en

Zitat von Django

Hi Sven,

with the BMW OEM spring, there is a sleeve above the spring, part 1 in this drawing:

[Blockierte Grafik: http://www.realoem.com/bmw/diagrams/m/u/8.png] 
You leave that away with the Wilbers spring. Then it's no problem, to assemble the stanchion without an spring compressor. The Wilbers spring is designed, to run without this sleeve.

Here the whole picture:
http://www.realoem.com/bmw/showparts.do?model=0522&mospid=51712&btnr=31_0334&hg=31&fg=42&lang=en

Alles anzeigen

Hi, thats nor right!

When you change the original Spring to Wilbers you must loos the part 6 ore 4 in this drawing:

http://www.realoem.com/bmw/sho…_0323&hg=31&fg=42&lang=de

If you leave the part 1 in the drawing, that Django show, maby you can hear a "Clicking" when you ride on a bad way.

I do this work some times, her a howto on my webside, only in german, but try it with goolge translate!

http://k1100lt.de/index.php/technik/gabel-zerlegen?showall=1